Allied Telesis AT-S39 - Manual (Page 223)

AT-S39 User’s Guide
223
Viewing the MAC Address Table
To view the MAC address table, perform the following procedure:
1. From the Home page, select either Configuration or Monitoring.
2. Select Layer 2.
3. From the Layer 2 page, select the MAC Address tab.
The MAC Address window is displayed. Figure 72 shows how this
window appears when you display it through the Configuration
main menu selection. If you display this window through the
Monitoring main menu selection, only the MAC Addresses Table
section is displayed. (The top port of the window, labelled MAC
Address, is used to enter static MAC addresses. For instructions on
how to add static MAC addresses, refer to the next procedure.)
Figure 72 Forwarding Database Tab