Allied Telesis AT-S39 - Manual (Page 21)

AT-S39 User’s Guide
21
SNMP Management Session
Another way to remotely manage the switch is with an SNMP
management program. A familiarity with Management Information Base
(MIB) objects is necessary to manage a switch with an SNMP
management program.
The AT-S39 software supports the following MIBs:
❑ SNMP MIB-II (RFC 1213)
❑ Bridge MIB (RFC 1493)
❑ Interface Group MIB (RFC 1573)
❑ Ethernet MIB (RFC 1643)
❑ Remote Network MIB (RFC 1757)
❑ Allied Telesyn managed switch MIB
You must download the Allied Telesyn managed switch MIB file from the
Allied Telesyn web site and compile the file with your SNMP program.
For instructions, refer to your SNMP management documentation.
Note
SNMP management does not utilize the enhanced stacking feature.
Consequently, you must assign an IP address to each switch to be
managed with an SNMP program.