Allied Telesis AT-S39 - Manual (Page 137)

AT-S39 User’s Guide
137
Adding Static MAC Addresses
The management software allows you to assign up to 255 static MAC
addresses per port on an AT-8024 or AT-8024GB Fast Ethernet Switch.
To add a static address to the MAC address table, perform the following
procedure:
1. From the Main Menu, type 6 to select MAC Address Table.
2. From the MAC Address Table menu, type 2 to select Add Static MAC
Address.
The following prompt is displayed:
Please enter a MAC address:
3. Enter the static MAC address in the following format:
XXXXXX XXXXXX
Once you have specified the MAC address, the following prompt
is displayed:
Please enter a port number: [1 to 24] ->
4. Enter the number of the port on the switch to which the device is
connected.
The management software adds the static address to the MAC
address table.
5. Repeat steps 2 to 4 to enter additional static MAC addresses.