Allied Telesis AT-MCF2300 - Manual (Page 87)

Section II: Installation 87
Chapter 6
Reviewing the Safety Precautions
Please review the following safety precautions before you begin to install
the chassis or any of the modules.
Note
The indicates that a translation of the safety statement is
available in the PDF document “Translated Safety Statements” (613-
000990) posted on the Allied Telesis website at
www.alliedtelesis.com. This document is also included on the
documentation CD that is shipped with the product.
If you are installing the AT-MCF2032SP Media Converter Module, refer to
the instructions that come with the SFP modules to determine whether
they are Class 1 laser products or Class1 LED products.
Warning: Class 1 Laser product. L1 (AT-MCF2012LC/1
Module)
Warning: Do not stare into the laser beam. L2
Class 1 LED product. L3 (AT-MCF2012LC Module)
Warning: The fiber optic ports contain a Class 1 laser device.
When the ports are disconnected, always cover them with the
provided plug. Exposed ports may cause skin or eye damage.
L4 (AT-MCF2012LC/1 Module)
Warning: Do not look directly at the fiber optic cable ends or
inspect the cable ends with an optical lens.
E29
Warning: To prevent electric shock, do not remove the cover.
No user-serviceable parts inside. This unit contains hazardous
voltages and should only be opened by a trained and qualified
technician. To avoid the possibility of electric shock, disconnect
electric power to the product before connecting or disconnecting
the LAN cables.
E1