Allied Telesis AT-MCF2300 - Manual (Page 102)

Chapter 10: Installing the AT-MCF2000AC or AT-MCF2300AC Power Supply Module
102 Section II: Installation
5. Position the retaining clip as shown in Figure 46 and press the sides of
the clip towards the center while inserting the short ends into the holes
in the bracket.
Figure 46. Installing a Retaining Clip
6. If the chassis will have two power supplies, repeat this procedure to
install the second module. If you are assembling an AT-MCF2300
Chassis and the chassis will not have a redundant power module, go
to the next procedure to install the AT-MCF2KFAN Fan Module.
Otherwise, go to Chapter 12, “Installing a Media Converter Module” on
page 107.
1410
AT-MC F2KPNL
3
NORM AL FAULT
STATUS PSU
FAN
M
A