Allied Telesis AT-MCF2300 - Manual (Page 101)

AT-MCF2000 Media Converter Series Installation Guide
Section II: Installation 101
3. Position the module as shown in Figure 44 and slide it into the slot until
it is flush with the chassis. You may need to exert light pressure to seat
the module on the connectors on the back panel in the chassis.
Caution
To prevent damaging the connector pins on the backplane, do not
force the module into place.
Figure 44. Installing the AT-MCF2000AC Power Supply Module
4. Secure the power supply module to the chassis by tightening the two
captive screws on the module using a cross-head screwdriver.
Figure 45. Securing the AT-MCF2000AC Power Supply Module
AT-MCF2KPN
L3
NORM AL FAULT
STATUS PSU
FAN
1111-a
MANAG
A
1113-a
AT-MCF2KPNL3
NORMAL
FAULT
STATUS
PSU
FAN
M
A