Allied Telesis AT-MCF2300 - Manual (Page 121)

AT-MCF2000 Media Converter Series Installation Guide
Section II: Installation 121
Caution
For maximum safety and stability of the device in the rack, use four
screws to secure each bracket to the chassis.
The brackets should not be installed in either of the positions shown in
Figure 67. They could present a physical hazard because they extend
beyond the equipment rack and the chassis.
Figure 67. Invalid Rack-mount Bracket Positions on the AT-MCF2300
Chassis
2. Install the second rack-mount bracket on the other side of the chassis
using the four remaining screws.
Caution
The chassis will be heavy. Assistance will be required to safely
install the unit in the equipment rack. Two people should hold the
chassis while another person secures it to the rack.
3. Mount the chassis in a 19-inch rack using standard screws (not
provided).
1420