Apple LaserWriter 12/640 PS - Manual (Page 59)

8 Click Continue.
After a moment, the Install dialog box appears. At the top of the dialog box is
a pop-up menu set to allow you to perform an Easy Install.
Easy Install installs all the software you need. It installs the LaserWriter 8
software, the Desktop PrintMonitor, the Apple Printer Utility, and the Control
Strip module (if the Control Strip is installed).
Custom Install lets you specify what portions of the software you would like
to install.
IMPORTANT The Installer checks to make sure you have what you need to use
the printer software. If you’re missing anything, a message tells you what you
need. You won’t be able to install the software until you correct the problem.
If a dialog box says you don’t have the correct system software, you can
purchase a new version from an Apple-authorized dealer.
9 Click the Install button.
The Installer takes a few moments to calculate what needs to be done and
then begins to copy files.
10 Follow the instructions on the screen until the installation is complete.
After the installation, the Installer tells you to restart your computer.
11 Click the Restart button.
The software is now installed on the hard disk. If you turned off any
automatic virus-detection programs on your computer, turn them back
on now.
After you restart, you may notice a new icon on your desktop, one that
represents a desktop printer.
You will also see the Apple LaserWriter Software folder on your hard disk.
This folder contains the Apple Printer Utility and Read Me files.
34 Chapter 2