beautypg.com

Dos notes 224, Using the apple laserwriter utility for windows – Apple LaserWriter 12/640 PS User Manual

Page 249

background image

7

If you changed any printer settings to print a PostScript file, choose Setup to display the

Setup dialog box. Undo any changes you made and then choose OK.

The Printers dialog box appears.

8

Select OK to close the Printers dialog box.

9

Choose Exit from the Settings menu to close the Control Panel.

DOS notes

If you are using DOS programs, refer to the manual that came with your
program and follow the instructions for using a PostScript printer. Most DOS
programs are PostScript compatible.

Capturing a print queue for DOS printing

From DOS, you can use the NetWare

CAPTURE

command to map the

parallel port to a print queue.

m

Log in to the NetWare network and enter the

CAPTURE

command, using the

following syntax:

CAPTURE /q=

queue_name

local=

lptnumber

server=

server_name

job=

new

Unless you specify otherwise, the command assumes that you are mapping
the LPT1 port to a queue.

Using the Apple LaserWriter Utility for Windows

The Apple LaserWriter Utility for Windows program supplied with the
printer software lets the printer administrator control various aspects of how
the printer works. For information about installing and using the Apple
LaserWriter Utility for Windows, see Chapter 3.

224

Chapter 7