Apple LaserWriter 12/640 PS - Manual (Page 251)

Before you begin
Set up the printer as described in Chapter 1, remembering to
m unpack and prepare the printer
m connect the printer to your NetWare network using Ethernet cables or
through a direct parallel connection to a PC
Setting up for parallel port printing
Your LaserWriter 12/640 PS uses a standard parallel port and cable. By
default, your printer’s parallel port is ready to receive data, and you should
not need to make any changes to either your computer’s or the printer’s
parallel port settings.
Installing the printer software for Windows 95
Installing from the CD-ROM disc
1 Start Windows 95.
Before installing the software, make sure the Control Panel and Printers
folder are closed.
2 Insert the LaserWriter 12/640 PS Software Installation CD-ROM disc into the CD-ROM
drive.
3 Open the WINDOWS directory.
4 Open the directory on the CD called WIN95\DISK1.
5 Double-click the setup.exe file.
After a few moments, a message appears warning you to close all other
applications before continuing with this installation.
6 Click Next if you have no other open applications.
If you have open applications, click Cancel to stop this installation. Close all
other applications and start the installation process again.
A message appears that lets you view the README.WRI file for late-
breaking news.
226 Chapter 8