Apple LaserWriter 12/640 PS - Manual (Page 150)

13 To test the connection, type the ping command from a workstation on the same
subnet as the printer:
ping printer_IP_name
If the ping command responds by telling you that the printer is alive on the
network, the address assignment was successful.
If the ping command does not respond, or tells you the printer was not
found, then the address assignment failed. Try the steps in this procedure
again, making sure you type the printer’s Ethernet address exactly as it
appears on the startup page. If it still doesn’t work, see the troubleshooting
suggestions in Chapter 13.
14 Test printing with the following command:
lp -d queue_name filename
Configuring IBM AIX version 3.x
1 Log in as root .
2 Assign an IP address and IP name to the printer, as described in “Step 3: Assigning an
IP Address to the Printer,” earlier in this chapter.
3 Make sure the printer’s IP name and address are entered in the /etc/hosts file.
4 At the UNIX prompt, type the following to run the SMIT utility:
smit
5 To add a remote queue, choose the following items from the SMIT menu:
Print System Management
Add a Print Queue
Remote
Standard Processing
A form appears for you to define a remote printer.
125 Setting Up the Printer for UNIX Users