Apple LaserWriter 12/640 PS - Manual (Page 253)

15 Select Disk 3 from the Directories list.
16 Select LaserWriter 12/640 PS from the PostScript Printer Descriptions Available list and
click Next.
17 Select LPT1 if the LaserWriter 12/640 PS is connected to your local computer.
18 Click Next.
The Add Printer dialog box appears.
19 Name your computer and select other options as necessary.
20 Click Next.
The printer Properties dialog box appears.
21 Click OK to dismiss the Properties dialog box.
A message appears telling you that the driver software was successfully
installed.
22 Click Add Another to install another Apple LaserWriter printer. Repeat for each printer
you want to install.
You can install other Apple LaserWriter printers supported by the software.
23 When you’re done, click Exit.
Installation is complete.
24 Choose how to proceed:
For most users connected via the parallel cable, the default printer driver
settings should suffice. If your computer is connected to the printer over a
NetWare network, follow these steps:
m Double-click the Network Neighborhood icon.
m In the dialog box that appears, double-click the server where the printer
queue you want to use is located.
m Double-click the printer icon representing the printer queue you want to
use.
m Follow the instructions on the screen for setting up the printer.
228 Chapter 8