Apple LaserWriter 12/640 PS - Manual (Page 225)

200 Chapter 7
Print Driver Only installs the minimum software needed for printing only. It
does not install the Apple LaserWriter Utility.
Custom Installation lets you specify what portions of the software you would
like to install. You can install one or more of the following: LaserWriter
Printer Driver, Apple LaserWriter Utility, Apple Printer Utility, Apple Print
Monitor, and PPDs onto Windows NT. The Apple Printer Utility and Apple
Print Monitor options are included for use with the Apple Color LaserWriter
12/600 PS only.
De-Install lets you remove previously installed LaserWriter software.
8 Click Express Install.
A window appears that keeps you informed as file decompression proceeds.
9 Click Restart Windows.
After Windows restarts, the Adobe PostScript Printers control panel appears.
10 Select the drive that holds your CD from the Drives list box.
11 Select LaserWriter 12/640 PS from the PostScript Printer Descriptions Available list and
click Install.
The PostScript printer driver files are installed on the hard disk. A message
appears telling you that the driver software was successfully installed.
12 Click OK to dismiss the message.
13 Select another Apple LaserWriter printer, if you want, and click Install to install. Repeat
for each printer you want to install.
You can install other Apple LaserWriter printers supported by the software.
` 14 When you’re done, click Close.
A message appears telling you to use the Printers control panel to connect
and set up the printers you've installed. By default, each printer uses LPT1.
The Printers control panel Setup dialog box lets you specify a different port,
for example, LPT2, or a NetWare queue.
Installation is complete.