Apple LaserWriter 12/640 PS User Manual
Page 325
300
Chapter 12
Faded areas or white voids appear on the page.
If portions of the page are faded or are missing, try the following steps:
m
Use different paper or transparency material.
m
Use paper that has been in a sealed wrapper; paper that has been out for a
long time may have too much moisture in it.
m
Redistribute the toner in the cartridge (see “Replacing the Toner Cartridge”
in Chapter 11).
m
Use the Apple Printer Utility or LaserWriter Utility for Windows to change
the print density to a darker level. (If you use a Mac OS computer, see
“Setting the Print Density” in Chapter 2. If you use an IBM PC or
compatible computer, see “Setting the Print Density” in Chapter 3.)
m
Replace the toner cartridge (see “Replacing the Toner Cartridge” in
Chapter 11).
Blotchy areas or ghost images appear on the page.
If there are blotchy areas within a gray area, or if you see ghosting of images
within printed areas (particularly on the top few inches of the page), try the
following step.
m
Print two or three more copies of your page; these problems often occur
only on the first rotation of the photosensitive drum inside the printer.
The printer isn’t printing from the correct paper tray.
m
Check that the correct page size is selected in the Mac OS or Windows
Page Setup dialog box.