Apple LaserWriter 12/640 PS - Manual (Page 343)

TCP/IP Printer Configuration Utility for UNIX
To configure the printer in a UNIX environment, run the printer’s TCP/IP
Printer Configuration Utility by using the
telnet program. The
Configuration Utility, which is described in Chapter 4, can perform these
functions:
m identify and permanently assign the printer’s IP address (As explained in
Chapter 4, you must use some other method to assign the initial IP
address.)
m set the the subnet mask of the IP address
m specify the IP address of the default network utility
m show information about the TCP/IP interface
m print the configuration page
m turn TCP/IP timeout checking on or off
m change the password for this utility
m specify whether banner pages are printed for each TCP/IP print job
m reset the printer’s TCP/IP interface
m restore the default parameters for the TCP/IP interface
318 Appendix A