Apple LaserWriter 12/640 PS - Manual (Page 257)

24 Choose how to proceed:
For most users connected via the parallel cable, the default printer driver
settings should suffice. If your computer is connected to the printer over a
NetWare network, follow these steps:
m Double-click the Network Neighborhood icon.
m In the dialog box that appears, double-click the computer where the printer
you want to use is located.
m Double-click the printer icon representing the printer you want to use.
m Follow the instructions on the screen for setting up the printer.
Note: If you don’t already have your NetWare queues set up, go to “Initial
Novell NetWare Setup,” in Chapter 3, when you finish installing the software.
For instructions on using the Apple LaserWriter Utility for Windows, see
“Setting Additional Parameters With the Apple LaserWriter Utility for
Windows” in Chapter 3.
To configure your printer software with NetWare, see “Initial Novell NetWare
Setup” in Chapter 3.
For instructions on using Adobe Type Manager, see the documentation
accompanying the ATM software.
Setting up for NetWare-based printing
Please see Chapter 3 of this manual, beginning with the section “Initial
Novell NetWare Setup.”
232 Chapter 8