Apple LaserWriter 12/640 PS - Manual (Page 349)

Configuring ATPS for the first time on a NetWare 4 server
If you are setting up the printer for access by Mac OS computers on a
NetWare 4 network and this is the first time you are configuring ATPS, follow
these instructions.
You can configure ATPS from the server console, or by running RCONSOLE
(remote console) from a client computer.
1 At the console prompt, type
load install
The Install utility starts and a list of Installation Options appears.
2 Choose the Maintenance/Selective Install option and press Enter.
An additional list of product options appears.
3 Select Product Options from the list and press Enter.
A list of product options appears. If the NLM is installed and operating, a
NW-MAC option will be available.
4 Select the NW-MAC option and press Enter.
A list of configuration files appears.
5 Select Configure Printer Services and press Enter.
A list of print service configuration options appears.
6 Select Quick Configuration and press Enter.
A list of lookup parameter options appears.
7 Select the Printer Model entry and press Enter.
A list of printer types appears.
8 Select the LaserWriter 12/640 PS option and press Enter.
9 In the lookup parameter list, change the zone name to the zone in which the printer is
currently located.
10 Select the Perform Lookup option and press Enter.
11 In the list of installed printers, locate and select the newly installed printer from the list.
(It should be identified as “LaserWriter 12/640 PS.”)
324 Appendix B