Apple LaserWriter 12/640 PS - Manual (Page 112)

13 Press Send.
The LaserWriter 12/640 PS is now ready to function as a print server on the
NetWare network.
What to do next: The next section covers setting up the printer as a remote
printer. If you want to assign a password on the server, skip to “Step 3:
Assigning a Password for the Print Server (Optional).” Otherwise, skip to
“Step 4: Setting Up the PostScript Printer Driver for NetWare.”
Step 2, option B: Setting up the printer as a remote printer
(RPRINTER mode)
To configure your printer as a remote printer, you must use PCONSOLE to
specify the print server that will provide service to your printer, create a print
queue (if necessary), and associate a print queue with the print server. You
must also use the Apple LaserWriter Utility to set up the printer as a remote
printer.
IMPORTANT The procedures in this section are specific for a version of
PCONSOLE running under NetWare 4.02. If you are running PCONSOLE
under NetWare 4.1 or NetWare 3.x, the menus and commands will differ
slightly.
Specifying a print server
1 Log on to a file server from a DOS client PC.
IMPORTANT You must have supervisor or equivalent privileges to select a print
server.
2 At the DOS prompt, type PCONSOLE and press Enter.
The utility starts and the Available Options menu appears, displaying printer
console options.
Print Queues
Printers
Print Servers
Quick Setup
Change Context
87 Setting Up the Printer for Windows, DOS, and NetWare Users