Apple LaserWriter 12/640 PS - Manual (Page 134)

Step 3: Assigning an IP address to the printer
When you unpack the printer, it has a unique permanent factory-assigned
Ethernet address, but no IP address. To assign an IP address to the printer,
you can use any one of the following methods, which are described more
fully in the sections that follow:
m ping assignment. Any printer administrator with superuser privileges can
use this method, which is sometimes called gleaning. If your network has
neither RARP nor BOOTP services, and you have no access to Windows or
Mac OS computers, you must use this method.
Note: This method works only when the printer has no IP address. If the
printer has an IP address, you must use
telnet .
m Apple Printer Utility and LaserWriter Utility for Windows. If your network includes
a Mac OS computer or Windows computer, you can use one of these utility
programs to set the printer’s IP address.
m RARP (Remote Address Resolution Protocol). If your network has a RARP
server, you can use this method.
m BOOTP (Bootstrap Protocol). If your network has a BOOTP server, you can
use this method.
These methods are described in the next three sections. Choose which section
applies to you, and skip the others.
Printer IP address assignment, option A: Using ping assignment
Any printer administrator with superuser privileges can use the ping
assignment method to assign the printer’s IP address and store it in the
printer’s nonvolatile memory (so it remembers the address even when the
printer is turned off).
Note: This method works only when the printer has no IP address. If you’ve
already set the printer’s IP address, you cannot change it by using this
method. You must use
telnet instead.
1 Turn on the printer and save the startup page that prints out.
2 Log in as root to any UNIX workstation on the same subnet as the printer.
109 Setting Up the Printer for UNIX Users