Specifying call home settings, Managing user accounts – HP VMA-series Memory Arrays User Manual
Page 76
76
HP VMA SAN Gateway User’s Guide
AM456-9026A
Specifying Call Home Settings
The Email (Call Home) Settings page allows you to enable email alerts in the following ways:
•
Auto Support—Enables the HP VMA SAN Gateway cluster to report alerts and critical events
to a specified email address. Auto Support requires an SMTP server and email domain name.
•
Fault Reporting—Specifies the SMTP server and mail domain name used for call-home
messages. These settings are also used for alerts.
To enable auto support and fault reporting, do the following:
1.
Select Administration > Notification > Call Home.
2.
Select the Enable Auto Support Notifications check box. A check mark appears. To turn this
feature off, select the check box again. The check mark disappears.
3.
In the Fault Reporting section, enter an SMTP Server address in the text field, such as
callhome.example.com.
4.
Enter the Mail Domain Name in the text field.
5.
Click Apply.
Managing User Accounts
User Management displays the name, role, email address, and password status of each user account
for the HP VMA SAN Gateway cluster. This section demonstrates how to perform the following
tasks:
•
Adding a User and Specifying a Role
on page 77
•
Changing an Account Password
on page 77
•
Editing a User Account
on page 78
•
Deleting a User Account
on page 79