HP VMA-series Memory Arrays - Manual (Page 173)

AM456-9026A HP VMA SAN Gateway User’s Guide 173
configuration revert
configuration revert saved
Revert the running configuration to the latest saved version of the active configuration file.
configuration revert factory [keep-basic | keep-connect]
Revert both running and saved configurations to factory defaults. If keep-basic is specified,
preserve local network configuration. If keep-connect is specified, preserve active licenses.
These two options are mutually exclusive.
configuration merge
configuration merge
Merges the shared configuration from one configuration file into the running configuration.
No configuration files are modified during this process. The must be a non-active
configuration file.
configuration switch-to
configuration switch-to
Load configuration from the specified file and change that to be the active configuration file. The
current running configuration is lost, and not automatically saved to the previous active
configuration file.
configuration write
configuration write
configuration write to
Write the running configuration to persistent storage. The former command writes it to the currently
active file. The latter command writes it to the specified file, and changes the active file to that one.
configuration write local
On a system with clustering, only save the configuration on the local box instead of attempting to
save on all cluster members.
configuration write to usb []
Save a local configuration file to a USB.