HP VMA-series Memory Arrays - Manual (Page 54)

54 HP VMA SAN Gateway User’s Guide AM456-9026A
Viewing Target Status
On the Target Management page, the details for the highlighted port appear in the panel on the right.
The node, target name, hostname, speed, and address of each type of target port.
To view status information for a target, do the following:
1. Select Manage > Manage Targets. The Target Management page appears, showing
information for all available target ports in one table.
2. To view details on a specific target, select (highlight) the target in the Available Targets panel
on the left.
Managing Transport Protocols
Some target port types are configured automatically when a storage container is created. Other
target ports must be configured manually.
• Fibre Channel target ports are automatically configured when you create the storage containers
on HP VMA Memory Arrays.
To enable target ports, do the following:
1. Select Manage > Manage Targets . The Target Management page appears.
2. Click the appropriate Enable protocol button.
To a disable active target ports, do the following:
1. Select Manage > Manage Targets. The Target Management page appears.
2. In the Manage Target Protocols panel, click the appropriate Disable protocol button.