HP VMA-series Memory Arrays - Manual (Page 160)

160 HP VMA SAN Gateway User’s Guide AM456-9026A
Display All User Accounts
show usernames
Display a list of all user accounts and the capabilities of each.
NTP, Clock, and Time Zones
This section provides the syntax for date and time commands, along with an explanation of the
functionality of each command.
Set the System Clock
clock set []
Set the system clock. The time must be specified. The date is optional; if not specified, the date will
be left the same.
Set the System Time Zone
clock timezone
no clock timezone
Set the system time zone. The time zone may be specified in one of three ways:
• A nearby city whose time zone rules to follow.
The system has a large list of cities that can be displayed by the help and completion system.
The city names are organized hierarchically. A given city may be required to be specified in
two, three, or four words, depending on the city. The possible forms this could take include:
• An offset from GMT.
This will be in the form GMT-offset GMT , GMT-offset GMT+<1-12> , or GMT-offset
GMT-<1-14> .
• UTC. This is almost identical to GMT.
The default is GMT-offset GMT .