beautypg.com

HP VMA-series Memory Arrays User Manual

Page 136

background image

136

HP VMA SAN Gateway User’s Guide

AM456-9026A

With the exception of the

show configuration full

and

show configuration running

full

commands, output omits commands that are not required because they set parameters to their

default values.

show configuration

The

show configuration

command displays commands to reproduce the state saved in the

active configuration file.

show configuration running

The

show configuration running

command displays commands to reproduce the state of the

current running configuration, which could include some unsaved configuration settings. The

show

running-config and the write terminal commands are the same as

show

configuration running

command.

show configuration files

The

show configuration files

command displays a list of all of the configuration files

associated with this VMA SAN Gateway.

show configuration files

The

show configuration files

command displays commands to reproduce

the state saved in the specified configuration file.

show configuration full

The

show configuration full

command displays all commands, including any default

settings, to reproduce the state saved in the active configuration file.

show configuration running full

The

show configuration running full

command displays all commands, including any

default settings, to reproduce the state of the current running configuration.

show configuration unsaved

The

show configuration unsaved

command displays commands that have been configured,

but not yet saved in the configuration file.

User passwords cannot be recovered with a

show configuration

command (or similar

command) unless the passwords are encrypted. For more information, see the command

username

password

in

User Accounts and Local Authentication

on page 158.

This manual is related to the following products: