HP VMA-series Memory Arrays User Manual
Page 161

AM456-9026A
HP VMA SAN Gateway User’s Guide
161
Display Current Date, Time, and Timezone
show clock
Display the current system time, date, and timezone.
Use the NTP Server to Set the System Clock
ntpdate
Set the system clock using the specified NTP server. This is a one-time operation and does not cause
the clock to be kept in sync on an ongoing basis. It will generate an error if NTP is enabled, as the
socket it requires will already be in use.
Add or Remove an NTP Peer
ntp peer
no ntp peer
Add or remove an NTP peer. Allowable version numbers are 3 and 4. If no version number is
specified when adding a peer, the default is 4.
Add or Remove an NTP Server
ntp server
no ntp server
Add or remove an NTP server. Allowable version numbers are 3 and 4. If no version number is
specified when adding a server, the default is 4.
Disable an NTP Server or Peer
[no] ntp peer
[no] ntp server
Disable or re-enable an NTP server or peer. Servers and peers start enabled; disabling is just a way
of making them temporarily inactive without losing their configuration.
Enable or Disable NTP
[no] ntp enable
[no] ntp disable