HP VMA-series Memory Arrays - Manual (Page 151)

AM456-9026A HP VMA SAN Gateway User’s Guide 151
Override the auto-detected size of the terminal. This is useful mostly when the size could not be
auto-detected and the CLI is using the default 80x24.
These settings are persistent only for the current CLI session. They are also lost if the terminal is
resized and the CLI is able to auto-detect its new size.
Note that the commands without the cli session prefix are identical to those with the prefix, and
are present only for Cisco compatibility.
Set Terminal Type
cli session terminal type
no cli session terminal type
terminal type
no terminal type
Set the type of the terminal. The 'no' variants clear the terminal setting, which will cause the session
to be treated as a “dumb” terminal.
Note that the commands without the cli session prefix are identical to those with the prefix, and
are present only for Cisco compatibility.
Clear Command History
cli clear-history
Clears the command history of the current user.
Display CLI Settings
show cli
Display CLI settings: the inactivity timeout, whether or not paging is enabled, the terminal size and
type. For settings which have configured defaults, both those and the current session settings are
displayed.
Display Terminal Details
show terminal
terminal width
terminal length