HP VMA-series Memory Arrays - Manual (Page 48)

48 HP VMA SAN Gateway User’s Guide AM456-9026A
The new name is applied and appears in the LUNs panel.
To increase the size of an existing LUN, do the following:
1. Select Manage > Manage LUNs. The LUN Management page appears.
2. In the Container panel, select a container from the Container drop-down list. This is the
container in which the LUN resides.
3. Select the LUN so that it highlights, then click the Edit LUN icon.
4. In the Edit LUN dialog, click Resize LUN.
5. Enter the New LUN size (GB) in the text box, and then click OK.
The LUN size is increased and appears in the LUNs panel.
Exporting LUNs, Initiator Groups, and Initiators
This section shows you how to export LUNs, initiator groups, and initiators.
To export LUNs, do the following:
1. Select Manage > Manage LUNs . The LUN Management page appears.
2. In the Container panel, select a container from the Container drop-down list.
3. In the LUNs panel, select the check box next to the LUN(s) you want to export.
Note: The check box next to the LUN name must show a check mark for the LUN to be included