HP VMA-series Memory Arrays - Manual (Page 170)

170 HP VMA SAN Gateway User’s Guide AM456-9026A
stats alarm rate-limit window short
stats alarm rate-limit window medium
stats alarm rate-limit window long
Configure the alarm event rate-limit duration windows for the three types of durations for alarms.
stats alarm rate-limit count short
stats alarm rate-limit count medium
stats alarm rate-limit count long
Configure the alarm event rate-limit maximum counts for the three types of counts for alarms.
stats alarm rate-limit reset
Reset the rate-limit counters and time for the specified alarm.
show stats alarm []
Displays the status of all alarms or the specified alarm, whether or not it is in an error state.
show stats cpu
show stats cpu
Display basic stats about CPU utilization: the current level, the peak over the past hour, and the
average over the last hour.
show stats fc
show stats fc [on (hostname |global)] [continuous] [detail] [port
]*
Shows Fibre Channel statistic values. Zero, one, or more than one port can be specified. If no host
is specified, FC ports at the local host are shown. Use the global parameter to show all the fc port
statistics values at the cluster. Both host-id and port-id can be combined to select specific ports at a
specific host to display.
show stats media
show stats media [on (hostname |global)][all] [block][chache]
[continuous] [detail]