HP VMA-series Memory Arrays - Manual (Page 110)

110 HP VMA SAN Gateway User’s Guide AM456-9026A
The show targets command lists all of the target ports and their addresses (wwn), filtered by
various options.
The session and detail options are particularly useful for understanding target port activity and
status.
The sessions option displays the number of SCSI sessions active on a target and the initiator and
the assigned LUN ID for each session.
The detail option returns the network bindings for each target.
SM075 [MY-vSHARE00: master] (config) # show targets protocol fc node 3
hostname SM076 sessions
Node Hostname Protocol Target Enab Address
---- --------------- -------- ---------- ---- ------------------------
3 SM076 fc hba-a1 yes wwn.21:00:00:1b:32:8f:24:5d
Connected Sessions : wwn.21:00:00:1b:32:82:1e:50
: wwn.21:00:00:1b:32:94:13:32
: wwn.21:01:00:1b:32:a2:1e:50
: wwn.21:01:00:1b:32:af:24:5d
: wwn.21:01:00:1b:32:b4:13:32
: wwn.21:fd:00:05:1e:09:ed:48
3 SM076 fc hba-a2 yes wwn.21:01:00:1b:32:af:24:5d
Connected Sessions : wwn.21:00:00:1b:32:82:1e:50
: wwn.21:00:00:1b:32:94:13:32
: wwn.21:01:00:1b:32:a2:1e:50
: wwn.21:01:00:1b:32:b4:13:32
: wwn.21:fd:00:05:1e:09:ed:48
SM075 [MY-vSHARE00: master] (config) # show targets protocol fc node 3
hostname SM076 detail
Target: hba-a1
Node : 3
Hostname : SM076
Protocol : fc
Address : wwn.21:00:00:1b:32:8f:24:5d
Enabled : yes
Link Up : Online
Port Type : NPort (fabric via point-to-point)
Speed : 4 Gbit
Supported Speeds : 1 Gbit, 2 Gbit, 4 Gbit, 8 Gbit