Show configuration files, Show configuration – HP VMA-series Memory Arrays User Manual
Page 135
AM456-9026A
HP VMA SAN Gateway User’s Guide
135
Show Configuration Files
To view a list of all of the configuration files associated with this VMA SAN Gateway, use the
show configuration files
command.
The command identifies the active file, the back up of the current active file (called
), and backups of previously active configuration files.
In the following example, the
show configuration files
command returns five configuration
files:
After switching from the original configuration file (named
initial
) to a file named
cf1
, and
saving that file to another file named
cf2
using the
no-switch
option, the CLI displays each of
these five configuration files.
To view the configuration files from the HP VMA Web Interface, see
Show Configuration
The
show configuration
commands enable you to view the commands required to bring a fresh
system up to match a given configuration.
•
show configuration
•
show configuration running
•
show configuration files
•
show configuration files
•
show configuration full
•
show configuration running full
•
show configuration unsaved
The output of each of these commands begins with a short header that contains the name and version
number of the configuration in a comment.
gateway02 [cluster1: master] (config) # show configuration files
initial
initial.bak
cf1 (active)
cf1.bak
cf2
gateway02 [cluster1: master] (config) #
█