Media block enable commands – HP VMA-series Memory Arrays User Manual
Page 116

116
HP VMA SAN Gateway User’s Guide
AM456-9026A
show media block detail
The
detail
option of the
show media
command returns detailed information about storage
media. The
detail
option may be combined with any other
show media
command option in any
order.
Media Block Enable Commands
Before a media device can be used for block storage, it must be enabled. This section describes
commands for enabling and disabling block storage media devices on a vSHARE San Gateway.
The
enable
commands described in this section can be used in Configure mode only. For more
information, see
Commands include:
•
media block id
•
no media block id
•
media block id all enable
•
no media block id all enable
SM076 [MY-vSHARE00: standby] (config) # show media block id all detail
Location PCI 2:
Status: online
Size: 429226196992
Type: block device
Firmware version: 3.7.2
Manufacturer model: VIOLIN_MEMORY_ARRAY
Manufacturer serial no: 6C057CWX00134
Device ID: ata-VIOLIN_MEMORY_ARRAY_6C057CWX00134
Violin model: Violin Memory Array
Violin serial no: Strad134
Violin Part number: V1010
Violin Revision: