HP VMA-series Memory Arrays - Manual (Page 66)

66 HP VMA SAN Gateway User’s Guide AM456-9026A
Viewing Gateway Node Details
The Gateways page lists all the SAN Gateways (nodes) in the management cluster, their status
(online/offline), their role (master node, standby node, normal node), and notification of unsaved
changes
To view SAN Gateway node details, do the following:
1. Select Administration > Cluster Admin > Gateways .
The Gateways page displays a list of active nodes. If the management cluster has too many
nodes to display on one page, click the Next to page forward and Prev to go back.
2. To change the number of nodes displayed per page, select a number from the Display drop-
down list and click Apply. The range of display alerts appears between the Prev and Next
hyperlinks.
3. To view detailed information on a particular node, click the Gateway node link in the list.
The View Gateway page shows the internal and external IP addresses, the node’s role and
status, uptime, software version, and the name of its installed image. The page also shows the
amount of DRAM installed on the node.
4. Click Show Gateway List to return to the list of Gateway nodes.
Viewing Alerts
The Alerts page shows a listing of current and past system events that triggered an alert. Select the
types of alerts to display (informational, warning, or error) and click the APPLY button.
To view cluster alerts, do the following:
1. Select Administration > Cluster Admin > Alerts .