Creating and deleting luns – HP VMA-series Memory Arrays User Manual
Page 43
AM456-9026A
HP VMA SAN Gateway User’s Guide
43
5.
To change the number of entries shown, choose one of the following from the Show entries
drop-down list: 10, 25, 50, or 100. The default is 25.
To perform operations on one or more LUNs, do the following:
1.
Select
Manage > Manage LUNs
. The LUN Management page appears.
2.
In the LUNs panel, select the check boxes next to the desired LUNs. A check mark appears in
the box next to the name.
Note:
A highlighted LUN that is not selected is not included in an operation. Performing an
operation on multiple LUNs simultaneously may take some time.
3.
Select one of the following options to apply the operation to all of the selected LUNs:
•
Remove Checked LUN(s)
•
Remove Exports for Checked LUN(s)
•
Export Checked LUN(s)
In the following example, Export Checked LUNs is selected. For more information on how to
export LUNs, see
Exporting LUNs, Initiator Groups, and Initiators
Creating and Deleting LUNs
This section walks you through the process of creating a LUN. Every LUN is created within a
container. The size and amount of used space in the container may restrict the number and size of
the LUNs created within the container.
The highlighted LUN does not have a
check mark (not selected), and therefore
is not included in the operation. You
must select a LUN to include it in an
operation.