HP VMA-series Memory Arrays User Manual
Page 114
114
HP VMA SAN Gateway User’s Guide
AM456-9026A
show media
The
show media
command returns all media devices that can be used as block storage on the
current San Gateway (node or module). This command shows a summary line for each device
location, giving the size and status of that device.
The
show media
command is an alias for
show media block id all
command. Media used
by the system for purposes other than block storage are not shown.
show media all
The
show media all command displays all media devices installed in a San Gateway. This
command shows a summary line for each device location, giving the size and status (online/offline)
of the installed media device.
The
Media ID
and
Model
values are displayed only for media devices that are usable as block
storage; otherwise, a string of three hyphens (
---
) is displayed instead.
show media global
To view information about storage media devices on a cluster, connect to the master node of the
cluster and add the
global
option to the
show media
commands.
Location Media ID Model Size Status
---------------------------------------------------------------------
unknown-00 Fender1002 Violin Memory Array 6895.75G online
unknown-01 Strad130 Violin Memory Array 432.00G online
Location Media ID Model Size Status
----------------------------------------------------------------------
unknown-00 Fender1002 Violin Memory Array 6895.75G online
unknown-01 Strad130 Violin Memory Array 432.00G online
unknown-02 --- --- 465.76G online
SM075 [MY-vSHARE00: master] # show media global
Module 2: SM075 (10.10.0.37)
Location Media ID Model Size Status