Show cluster global command – HP VMA-series Memory Arrays User Manual
Page 131
AM456-9026A
HP VMA SAN Gateway User’s Guide
131
The following is an example of
show cluster global brief
on the standby node:
For each node, the display gives the node role (master or secondary pair), host ID, external IP
address, and internal IP address.
An asterisk after a node’s ID number designates the local node on which the command was issued
Show Cluster Global Command
Without the
brief
option, the
show cluster global
command displays additional information
about each HP VMA SAN Gateway in the pair. Instead of using an asterisk to designate the local
node ID, the label
<--- (local node)
is used.
SM076 [NJ-Lab-vSHARE00: standby] # show cluster global brief
Global cluster state summary
==============================
Cluster ID: 99999-9999-1023
Cluster name: NJ-Lab-vSHARE00
Management IP: 10.10.0.38/24
Cluster master IF: eth1
Cluster node count: 2
ID Role State Host External Addr Internal Addr
----------------------------------------------------------------------
2 master online SM075 10.10.0.37 10.10.0.37
3* standby online SM076 10.10.0.143 10.10.0.143
gateway02 [cluster1: master] # show cluster global
Cluster ID: 00500-0008-0175
Cluster name: cluster1
Management IP: 10.3.19.65/22
Cluster master IF: eth1
Cluster node count: 2
Node Status:
Node ID: 1 <--- (local node)
Host ID: 75527d83e101