HP VMA-series Memory Arrays - Manual (Page 154)

154 HP VMA SAN Gateway User’s Guide AM456-9026A
Set Log Severity for All Syslog Servers
logging trap
Set the minimum severity of log messages sent to all syslog servers. Note that the Cisco command
set does not provide for setting different severity levels on a per-server basis.
Set, clear, enable, or disable class-specific log level overrides for all syslog servers. Semantics are
the same as for the logging local ... variants above.
Set Log Severity for a Specific Syslog Server
logging trap
Set the minimum severity of log messages sent to the indicated syslog server. This is not Cisco
compatible (as noted above) but does match functionality provided in the reference UI.
Specify Log Overrides for a Specific Syslog Server
logging trap override class priority
no logging trap override class
[no] logging trap override
Set, clear, enable, or disable class-specific log level overrides for the specified syslog server.
Semantics are the same as for the logging local ... variants above.
Disable Logging for All Syslog Servers
no logging trap
Disable logging to syslog servers altogether. This simply sets the severity level to none ; the list of
servers is not erased. Does not affect console or local logging, despite the generic sound of the term
trap .
Allow Logs from Another Host
[no] logging receive
Allow this system to receive log messages from another host. This is disabled by default. If enabled,
only log messages matching or exceeding the minimum severity specified with the logging
local command are logged, regardless of what is sent from the remote host.