HP Storage Mirroring Software - Manual (Page 594)

Data transmission Page 593 of 677
4. You have three bandwidth choices.
l
No Bandwidth Limit—Data will be transmitted at all times using all available
bandwidth.
l
Fixed Bandwidth Limit—Data will be transmitted at all times according to
the user-specified bandwidth configuration.
l
Scheduled Bandwidth Limit—Data will be transmitted according to the
user-specified schedule and the user-specified bandwidth configuration.
5. If you want to transmit data at all times using all of the available bandwidth, select
No Bandwidth Limit.
6. If you want to transmit data at all times using limited bandwidth, select Fixed
Bandwidth Limit.
a. By default, the Unlimited checkbox is enabled. This configuration is identical
to selecting No Bandwidth Limit. If you want to limit your bandwidth usage,
clear this checkbox.
b. To limit the bandwidth usage, enter the maximum amount of data you want to
transfer per second. You can indicate it by specifying your Connection
Speed and the Percentage of the bandwidth that you want to use or by
entering the Transfer Rate value directly.