HP Storage Mirroring Software - Manual (Page 222)

Workload protection Page 221 of 677
Configuring DNS failover
Application Manager will automatically determine default DNS failover settings. Use the
following instructions to modify the DNS failover settings.
1. The DNS Server list contains all DNS IP addresses for the source and target
servers. The label after the IP address indicates if the DNS IP address belongs to
the source, target, or both. To additional DNS servers to the list, enter an IP
address into the DNS Server field and click Add. To remove an IP address from
the list, highlight the address and click Delete.
Note: If you want to set the primary DNS server that Storage Mirroring Recover
will use during failover, you can specify Client DNS Server. This option is
only available if you have launch the Application Manager using the
command line advanced option .
2. Under Source IP addresses to update, map a source IP address to a target IP