HP Storage Mirroring Software - Manual (Page 225)

Workload protection Page 224 of 677
Configuring identity failover
Application Manager will automatically determine default identity failover settings. Use
the following instructions to modify the identity failover settings.
1. Under Source IP address to failover, map a Source IP address to a Target NIC.
The target NIC will assume the source IP address during failover. The Target IP
addresses list displays the IP address(es) of the selected Target NIC.
2. The default selected items under Items to Failover will depend on the application
you are protecting. Enable or disable if you want to failover the source's IP
addresses, server name, file shares, and/or Active Directory host name.
Note: If your source and target are on different subnets, you should not failover the
IP address.
Exchange Note: If you are protecting Exchange, do not failover the Active
Directory host name.