HP Storage Mirroring Software - Manual (Page 591)

Data transmission Page 590 of 677
will be established when there is 10 MB of data in the queue. The
data will be transmitted and when the 10 MB Byte Limit is reached,
the network connection closes. This is useful in configurations where
metered charges are based on connection time.
6. Schedule a transmission window to establish a period of availability for all Storage
Mirroring Recover transmissions. You can specify a begin and end time for all
Storage Mirroring Recover transmissions. When a transmission window is in effect,
all other start and stop criteria are bound by this window. This means that Storage
Mirroring Recover will never transmit data outside of an established window,
regardless of other transmission settings. For example, if you set a window of
availability from 9 p.m. to 4 a.m. and a start option to initiate transmission at 5 a.m.,
the window option will override the start option and no data will be sent at 5 a.m.
Select the Window option in the Limit Type box.
Note: Setting a transmission window by itself is not sufficient to start a
transmission. You still need to set a start criteria within the window.
Define a window to control Storage Mirroring Recover transmissions by enabling
the feature and then specifying both window options.