HP Storage Mirroring Software - Manual (Page 240)

Workload protection Page 239 of 677
Configuring file server protection
If you are protecting a file server, you can specify the file shares that you want to protect.
1. Make sure you have a valid domain and servers specified, click Configure from
the main Application Manager page, and then select the Connection tab.
Note: The fields on the Connection tab will vary depending on the type of
application you are protecting.
2. By default, all non-administrative file shares will be selected. Select or deselect the
file shares in the tree that you want to protect.
Note: The File Shares list will be disabled if you have enabled Override
Generated Rules on the Advanced tab.
If your source is a domain controller, you cannot protect the NETLOGON
and SYSVOL shares and they will not be visible in the File Shares tree.
3. If desired, you can select additional data to protect under the Volumes folder.
4. Click Refresh if you need to refresh the items in the tree view.
5. Click OK to save the settings.