HP Storage Mirroring Software - Manual (Page 312)

Workload protection Page 311 of 677
l
Fixed Bandwidth Limit—Data will be transmitted according to the user-
specified bandwidth configuration. By default, the Unlimited checkbox is
enabled. This configuration is identical to selecting No Bandwidth Limit. If
you want to limit your bandwidth usage, clear this checkbox. To limit the
bandwidth usage, enter the maximum amount of data you want to transfer per
second. You can indicate it by specifying your Connection Speed and the
Percentage of the bandwidth that you want to use or by entering the
Transfer Rate value directly.
9. Click Next to continue.
10. Specify your Storage Mirroring Recover orphan file parameters. By default, the
orphan files feature is disabled. To enable it, select Move/Delete Orphan Files.
Specify if you want to delete or move the files. If you select the move option,
identify the location where these orphan files will be located. Click Next to
continue.
11. Specify your Storage Mirroring Recover compression parameters. By default,
compression is disabled. To enable it, select Enable Compression. Depending
on the compression algorithms available for your operating system, you may see a
slider bar indicating different compression levels. Set the level from minimum to
maximum compression to suit your needs. Click Next to continue.
12. Specify your Storage Mirroring Recover mirroring settings.
l
Full Mirror—All files in the replication set will be sent from the source to the
target.