HP Storage Mirroring Software - Manual (Page 232)

Workload protection Page 231 of 677
Routing data transmissions
1. Make sure you have a valid domain and servers specified, click Configure from
the main Application Manager page, and then select the Connection tab.
Note: The fields on the Connection tab will vary depending on the type of
application you are protecting.
2. By default, Storage Mirroring Recover will select the default Route for
transmissions. If desired, select a different IP address on the target that will be
used for transmissions. If you are using a cluster, use the virtual server IP address.
3. Click OK to save the settings.