HP Storage Mirroring Software - Manual (Page 296)

Workload protection Page 295 of 677
E-mailing notifications
1. From the Protection summary page, click Change in the E-mail notifications
section.
Note: In order to use e-mail notification, you may need to complete any or all of
the following on the Storage Mirroring Recover for Virtual Infrastructure
server.
l
Disable anti-virus software
l
Open port 25 in your anti-virus software to allow SMTP e-mail
l
Enable outbound e-mail messages
l
Exclude VI_Service.exe from blocked processes for sending outbound e-
mail messages.
2. If you have not yet configured an e-mail server, you will be prompted at the top of
the window. Click Configure.
3. Specify the e-mail notification settings.
l
Recipients—Enter the e-mail addresses where the e-mail messages should
be sent. Separate the addresses with a comma, semi-colon, or carriage
return.
l
Notifications—Select the event categories that you want to be notified
about. If there are no event categories selected, there will be no e-mail
notifications.
4. Click Test E-mail Settings to verify your e-mail configuration.
Note: The following error message indicates anti-virus software on the server may
be blocking outbound e-mail messages.
Failure sending mail. Unable to connect to the remote server.
An established connection was aborted by the software in your
host machine.
5. Click Save.