HP Storage Mirroring Software - Manual (Page 563)

Replication Page 562 of 677
Modifying a replication set
Storage Mirroring Recover allows you to make modifications to a replication set when
you want to change the data you wish to protect. This allows you to add, remove, or
modify any replication set rules without having to create a new replication set.
1. Open the Replication Console .
2. In the left pane, highlight the replication set you want to modify and expand the
volume and directory levels as needed.
3. Modify the items by marking or clearing the volume, drive, directory, or file check
boxes. Notice the replication set icon has changed from black to red, indicating
changes to the replication set rules.
4. After updating the rules for this replication set, right-click the replication set icon
and select Save. A saved replication set icon will change from red to black.
Note: If you save changes to a connected replication set, it is recommended that you
perform a mirror to guarantee data integrity between the source and target
machines. A dialog box will appear instructing you to disconnect and reconnect
the replication set and perform a difference mirror.
If your source is a cluster, you must make the same modifications to the
replication set on the non-owning nodes. The replication set rules must be
identical on all nodes for Storage Mirroring Recover to function properly on the
cluster.