HP Storage Mirroring Software - Manual (Page 529)

Connections Page 528 of 677
Queuing data
You should configure queuing on both the source and target.
1. Open the Replication Console and right-click the server on the left pane of the
Replication Console.
2. Select Properties.
3. Select the Queue tab.
4. Specify the queue settings for the server.
l
Folder—This is the location where the disk queue will be stored. Storage
Mirroring Recover displays the amount of free space on the volume selected.
Any changes made to the queue location will not take effect until the Storage
Mirroring service has been restarted on the server.
When selecting the queue location, keep in mind the following caveats.