HP Storage Mirroring Software - Manual (Page 197)

Workload protection Page 196 of 677
6. Double-click on any of the validation items to see details. You must correct any
errors before you can enable protection. Depending on the error, you may be able
to click Fix or Fix All and let Storage Mirroring Recover correct the problem for you.
For those errors that Storage Mirroring Recover cannot correct automatically, you
will need to modify the target to correct the error, or you can select a different target.
You must revalidate the selected servers until the validation check passes without
errors.
7. Once the validation check passes without errors, click Enable Protection to begin
monitoring.
Note: After protection is enabled, a View Configuration link will display the optional
protection settings in read-only mode. If you need to modify any of the optional
protection settings, you will have to disable your protection, modify the optional
protection settings, and then re-enable protection.
If you have a full-server protection connection established, do not create any
other Storage Mirroring Recover connections from or to the source or target.