GW Instek GDM-8261A User manual - Manual (Page 99)

STORE/RECALL
99
Recall Measurement Record
Background The GDM-8261A can recall previously recorded
measurement results for observation and analysis. The
Standard Deviation, Maximum Value, Minimum Value
and Average Value can also be viewed.
Not applicable to Store/recall measurement history is not applicable to the
Diode/Continuity tests .
Recall stored
record Press the Shift key, then the ACI
(Recall) key. The stored
measurement record appears.
/ EXIT SHIFT
ACI
RECALL
V
RCL
1st display Shows the stored measurement result
2nd display Shows the reading count
RCL Indicates the data has been recalled
View each
reading Change the reading count using the
Up/Down key.
View Max/Min/
Average Switch to the Standard
Deviation/Average/Maximum/
Minimum value of the recorded data
using the Right key. Use the left key
to go back.
HOLD TRIG
   