GW Instek GDM-8261A User manual - Manual (Page 146)

GDM-8261A User Manual
146
2. Press the Down key and the
Right key. The DHCP selection
display appears.
TRIG
3. Press the Down key. The DHCP
ON/OFF selection appears.
4. Press the Up/Down key to
select ON or OFF. ON will turn
on DHCP, OFF will turn off
DHCP.
5. Press the Enter key followed by
the Exit key.
AUTO
ENTER
/ EXIT SHIFT
2. Reset LAN
card 1. To make any changes take effect, set RESET to YES.
See page 144 for details.
Configure Ethernet IP
Background The GDM-8261A supports manually setting of the IP
addresses, including the subnet mask, gateway and DNS.
1. Manual IP
Configuration 1. Press the Shift key, the 2nd
(Menu) key, and the Left key
repeatedly until the SET LAN
configuration menu appears.
Note: SET LAN will only be
available after LAN has been
activated in the I/O menu, see
page 142.
/ EXIT SHIFT
2ND
MENU
HOLD