GW Instek GDM-8261A User manual - Manual (Page 147)

REMOTE CONTROL
147
2. Press the Down key and the
Right key twice. The IP
selection display appears.
Note: The IP address can only
be edited if DHCP is off.
TRIG
TRIG
3. Press the Down key. The IP
address selection appears.
IP1 IP4 IP2 IP3
The IP address is divided in 4 groups;
IP1:IP2:IP3:IP4. The cursor will be flashing on IP1
(indicated by ―X‖).
4. Use the Left/Right keys to
move the cursor to the IP1 value
and select a digit.
HOLD TRIG
5. Press the Up/Down key to edit
the selected digit.
6. Press the Enter key to confirm
and automatically go onto IP2.
AUTO
ENTER